IPv6 Help
![]()
Hi there,
i got an email this morning saying that my ipv6 tunnel has been down for a day.
i can ping both ends of the tunnel.
root@OpenWrt:~# ping6 3ffe:4005:1000:6b::1
PING 3ffe:4005:1000:6b::1 (3ffe:4005:1000:6b::1): 56 data bytes
64 bytes from 3ffe:4005:1000:6b::1: icmp6_seq=0 ttl=64 time=18.0 ms
64 bytes from 3ffe:4005:1000:6b::1: icmp6_seq=1 ttl=64 time=31.2 ms
64 bytes from 3ffe:4005:1000:6b::1: icmp6_seq=2 ttl=64 time=16.5 ms
64 bytes from 3ffe:4005:1000:6b::1: icmp6_seq=3 ttl=64 time=15.5 ms
64 bytes from 3ffe:4005:1000:6b::1: icmp6_seq=4 ttl=64 time=17.0 ms
64 bytes from 3ffe:4005:1000:6b::1: icmp6_seq=5 ttl=64 time=18.0 ms
64 bytes from 3ffe:4005:1000:6b::1: icmp6_seq=6 ttl=64 time=16.7 ms
--- 3ffe:4005:1000:6b::1 ping statistics ---
7 packets transmitted, 7 packets received, 0% packet loss
round-trip min/avg/max = 15.5/18.9/31.2 ms
root@OpenWrt:~# ping6 3ffe:4005:1000:6b::2
PING 3ffe:4005:1000:6b::2 (3ffe:4005:1000:6b::2): 56 data bytes
64 bytes from 3ffe:4005:1000:6b::2: icmp6_seq=0 ttl=64 time=0.7 ms
64 bytes from 3ffe:4005:1000:6b::2: icmp6_seq=1 ttl=64 time=0.6 ms
64 bytes from 3ffe:4005:1000:6b::2: icmp6_seq=2 ttl=64 time=0.6 ms
Can someone try and ping my end of the tunnel please and let me knwo if it's up and running if it's not any ideas on why it wouldn't be pinging.
Thanks in Advance.
Sean
IPv6 Help
Did you try looking at the tunnel latency graphs ?
Also a great descriptive subject btw.
IPv6 Help
![]()
I tried to see the graphics but the colour is very light and difficult to see is there any way of using a bigger line. i will check the graphs again now.
Is there an ipv6 rule to allow pings ??
Sean
IPv6 Help
![]()
I've sorted it now thanks i was doing silly things setting up the route.
it should be all sorted now and the scripts have been update.
Thanks.
Sean
|