| 
 
tunnel doesn't work after router reset 
  Shadow Hawkins on Thursday, 23 August 2007 09:40:05
hi,
my tunnel doesn't work anymore (but did fine until today i resetted my router, wrt54).
symptoms: no reply from remote.
i'm using aiccu:
 * Service aiccu starting
Tunnel Information for T2148:
POP Id      : deham01
IPv6 Local  : 2001:6f8:900:f2::2/64
IPv6 Remote : 2001:6f8:900:f2::1/64
Tunnel Type : 6in4-heartbeat
Adminstate  : enabled
Userstate   : enabled
 * Service aiccu started
after that my syslog says:
Aug 23 09:28:32 [aiccu] TIC Server does not support TLS but TLS is not required, continuing_
Aug 23 09:28:33 [aiccu] Succesfully retrieved tunnel information for T2148_
Aug 23 09:28:33 [aiccu] AICCU running as PID 15202_
Aug 23 09:28:33 [kernel] sixxs: Disabled Privacy Extensions
# /usr/sbin/aiccu test
Tunnel Information for T2148:
POP Id      : deham01
IPv6 Local  : 2001:6f8:900:f2::2/64
IPv6 Remote : 2001:6f8:900:f2::1/64
Tunnel Type : 6in4-heartbeat
Adminstate  : enabled
Userstate   : enabled
ioctl: No buffer space available
RTNETLINK answers: File exists
RTNETLINK answers: File exists
#######
... and so on ...
all local pinging works fine. but no reply from 2001:6f8:900:f2::1.
my routing table:
Ziel                                        Nächster Hop                                 Flags Metric Ref    Benutzer Iface
::1/128                                     ::                                      U     0      291       1 lo      
2001:6f8:900:f2::2/128                      ::                                      U     0      0        1 lo      
2001:6f8:900:f2::/64                        ::                                      U     256    1        0 sixxs   
2001:6f8:9ba::/128                          ::                                      U     0      691353       1 lo      
2001:6f8:9ba::/48                           ::                                      U     256    0        0 eth0    
fe80::a00:5/128                             ::                                      U     0      0        1 lo      
fe80::230:1bff:fe43:725d/128                ::                                      U     0      0        1 lo      
fe80::/64                                   ::                                      U     256    0        0 eth0    
fe80::/64                                   ::                                      U     256    0        0 sixxs   
ff00::/8                                    ::                                      U     256    0        0 eth0    
ff00::/8                                    ::                                      U     256    0        0 sixxs   
::/0                                        2001:6f8:900:f2::1                      UG    1024   55       0 sixxs   
i don't filter icmp or icmp6. i'm using nat, but i haven't changed any configuration since the last working ipv6-configuration.
 # ping6 -c3  2001:6f8:900:f2::1
PING 2001:6f8:900:f2::1(2001:6f8:900:f2::1) 56 data bytes
--- 2001:6f8:900:f2::1 ping statistics ---
3 packets transmitted, 0 received, 100% packet loss, time 2008ms
and of course, there is no significant timedrift to the remote point.
my system: gentoo linux, 2.6.22-gentoo-r2, glibc 2.5-r4, aiccu 2007.01.15.
but, as i said, i haven't changed any configuration and sixxs worked fine for many weeks or months now...
i hope anyone can help me. thanks!
cu
sven
 
tunnel doesn't work after router reset 
  Shadow Hawkins on Thursday, 23 August 2007 10:08:02
okay, it seems it was a routing problem (my routing table was not correct i think).
thanks, anyway.
 
  |