Forum - Can't ping the server. :: SixXS - IPv6 Deployment & Tunnel Broker

Can't ping the server.

Shadow Hawkins on Thursday, 02 April 2009 00:06:35

I have a debian, recently installed the system with apt-get install aiccu. My connecion may be filtered by Arnet (Argentina Telecom) but would like to rule out all other posibilities. Any help would be greatly apreciated. My Setup:

localhost:~# /etc/init.d/aiccu restart Restarting SixXS Automatic IPv6 Connectivity Client Utility (aiccu)...Tunnel Information for T20568: POP Id : usqas01 IPv6 Local : 2001:4830:1600:1a2::2/64 IPv6 Remote : 2001:4830:1600:1a2::1/64 Tunnel Type : ayiya Adminstate : enabled Userstate : enabled

tail /var/log/syslog

Apr 1 18:55:36 localhost aiccu: sock_getline() : "Heartbeat_Interval: 60" Apr 1 18:55:36 localhost aiccu: sock_getline() : "202 Done" Apr 1 18:55:36 localhost aiccu: Succesfully retrieved tunnel information for T20568 Apr 1 18:55:36 localhost aiccu: sock_printf() : "QUIT Tschau!" Apr 1 18:55:36 localhost kernel: [114969.898875] sixxs: Disabled Privacy Extensions Apr 1 18:55:36 localhost aiccu: AICCU running as PID 6081 Apr 1 18:55:36 localhost aiccu: [AYIYA-start] : Anything in Anything (draft-02) Apr 1 18:55:36 localhost aiccu: [AYIYA-tun->tundev] : (Socket to TUN) started

ifconfig

sixxs Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet6 addr: 2001:4830:1600:1a2::2/64 Scope:Global inet6 addr: fe80::4830:1600:1a2:2/64 Scope:Link UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1400 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:0 (0.0 B) TX bytes:832 (832.0 B)

netstat -pan | grep aiccu

localhost:~# netstat -pan | grep aiccu udp 0 0 10.0.0.250:35711 66.117.47.228:5072 ESTABLISHED 6081/aiccu unix 2 [ ] DGRAM 128040 6081/aiccu

Ping localside of the tunnel

localhost:~# ping6 2001:4830:1600:1a2::2 PING 2001:4830:1600:1a2::2(2001:4830:1600:1a2::2) 56 data bytes 64 bytes from 2001:4830:1600:1a2::2: icmp_seq=1 ttl=64 time=0.051 ms 64 bytes from 2001:4830:1600:1a2::2: icmp_seq=2 ttl=64 time=0.059 ms 64 bytes from 2001:4830:1600:1a2::2: icmp_seq=3 ttl=64 time=0.056 ms 64 bytes from 2001:4830:1600:1a2::2: icmp_seq=4 ttl=64 time=0.054 ms ^C --- 2001:4830:1600:1a2::2 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3000ms rtt min/avg/max/mdev = 0.051/0.055/0.059/0.003 ms

Ping serverside of the tunnel

localhost:~# ping6 2001:4830:1600:1a2::1 PING 2001:4830:1600:1a2::1(2001:4830:1600:1a2::1) 56 data bytes ^C --- 2001:4830:1600:1a2::1 ping statistics --- 4 packets transmitted, 0 received, 100% packet loss, time 2999ms

I get nothing and can't figure out why. even though I am connected via UDP to the server. Is there something in my configuration? any ideas where to look? Thanks.

Please note Posting is only allowed when you are logged in.