|
Have IPv6 tunnel, AICCU, but not working
![[ca]](/s/countries/ca.gif) Shadow Hawkins on Monday, 02 November 2009 06:45:39
As it will become apparent very quickly, I'm a noob. I've tried looking for a solution in the forums, and don't understand most of what I see. Perhaps this just isn't for me, but I want to try.
My request for an IPv6 tunnel was approved. I'm running Win7 x64, and downloaded AICCU, logged in, and selected my tunnel (just the one tunnel listed). I received a message about my IP address not matching, which is because I'm using a router (with Tomato/MLPPP installed), so I selected "Behind NAT." When I click "Configure," the "Deconfigure" button is available, but "Test" is not. When I use IPv6Calc, it says nothing about IPv6. When I try to connect to an IPv6 Usenet server, it times out.
I read somewhere on the site that TCP 3874 should be forwarded, so I did that. I also read something about AICCU having issues with Win7, so maybe that's the only problem.
Any suggestions would be most appreciated.
Have IPv6 tunnel, AICCU, but not working
![[us]](/s/countries/us.gif) Shadow Hawkins on Monday, 02 November 2009 14:20:06
What is the error message you recieve?
Can you post the output of "ipconfig /all" and your routing table?
Have IPv6 tunnel, AICCU, but not working
Shadow Hawkins on Monday, 02 November 2009 14:38:54
I'm not receiving a message, I'm just not able to see any IPv6 information with IPv6Calc, and can't connect to any IPv6 Usenet servers.
Windows IP Configuration
Host Name . . . . . . . . . . . . : xxxxxxxx
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Wireless LAN adapter Wireless Network Connection (Wireless):
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : ASUS 802.11 g/b Wireless PCI Adapter
Physical Address. . . . . . . . . : 00-26-18-C4-65-27
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::6c31:f693:8671:19ea%14(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.100(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : November-02-09 8:04:01 AM
Lease Expires . . . . . . . . . . : November-03-09 8:04:01 AM
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DHCPv6 IAID . . . . . . . . . . . : 402662936
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-11-D8-2E-74-00-50-8D-9F-13-BD
DNS Servers . . . . . . . . . . . : 192.168.1.1
NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter Local Area Connection 2:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek RTL8169/8110 Family PCI Gigabit Ethernet NIC (NDIS 6.20) #2
Physical Address. . . . . . . . . : 00-50-8D-9F-13-BC
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Ethernet adapter Local Area Connection:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek RTL8169/8110 Family PCI Gigabit Ethernet NIC (NDIS 6.20)
Physical Address. . . . . . . . . : 00-50-8D-9F-13-BD
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{699DE022-E69A-446C-A2B1-E9160573BFAB}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 11:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2001:0:4137:9e50:880:21f7:ba5a:5092(Preferred)
Link-local IPv6 Address . . . . . : fe80::880:21f7:ba5a:5092%12(Preferred)
Default Gateway . . . . . . . . . : ::
NetBIOS over Tcpip. . . . . . . . : Disabled
Tunnel adapter isatap.{324774A5-7488-4E2B-88F3-83819E82663F}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{24B02F97-A457-41D6-B98A-267FD6B28BBD}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #3
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
===========================================================================
Interface List
14...00 26 18 c4 65 27 ......ASUS 802.11 g/b Wireless PCI Adapter
13...00 50 8d 9f 13 bc ......Realtek RTL8169/8110 Family PCI Gigabit Ethernet N
IC (NDIS 6.20) #2
11...00 50 8d 9f 13 bd ......Realtek RTL8169/8110 Family PCI Gigabit Ethernet N
IC (NDIS 6.20)
1...........................Software Loopback Interface 1
15...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter
12...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface
18...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2
19...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #3
===========================================================================
IPv4 Route Table
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.100 25
127.0.0.0 255.0.0.0 On-link 127.0.0.1 306
127.0.0.1 255.255.255.255 On-link 127.0.0.1 306
127.255.255.255 255.255.255.255 On-link 127.0.0.1 306
192.168.1.0 255.255.255.0 On-link 192.168.1.100 281
192.168.1.100 255.255.255.255 On-link 192.168.1.100 281
192.168.1.255 255.255.255.255 On-link 192.168.1.100 281
224.0.0.0 240.0.0.0 On-link 127.0.0.1 306
224.0.0.0 240.0.0.0 On-link 192.168.1.100 281
255.255.255.255 255.255.255.255 On-link 127.0.0.1 306
255.255.255.255 255.255.255.255 On-link 192.168.1.100 281
===========================================================================
Persistent Routes:
None
IPv6 Route Table
===========================================================================
Active Routes:
If Metric Network Destination Gateway
12 33 ::/0 On-link
1 306 ::1/128 On-link
12 33 2001::/32 On-link
12 281 2001:0:4137:9e50:880:21f7:ba5a:5092/128
On-link
14 281 fe80::/64 On-link
12 281 fe80::/64 On-link
12 281 fe80::880:21f7:ba5a:5092/128
On-link
14 281 fe80::6c31:f693:8671:19ea/128
On-link
1 306 ff00::/8 On-link
12 281 ff00::/8 On-link
14 281 ff00::/8 On-link
===========================================================================
Persistent Routes:
None
Have IPv6 tunnel, AICCU, but not working
Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv6 Address. . . . . . . . . . . : 2001:0:4137:9e50:880:21f7:ba5a:5092(Preferred)
You have Teredo. You don't have any interface created by AICCU though.
Might I suggest using the console version of AICCU in combination with the newest Tun/TAP drivers? See the wiki for more details.
Have IPv6 tunnel, AICCU, but not working
Shadow Hawkins on Monday, 02 November 2009 20:23:46
I disabled Teredo, got AICCU console running, but am unable to install the TAP drivers. When I run the TAP installer, a console screen flashes up briefly and disappears.
The output from AICCU console doesn't make a whole lot of sense to me, but I don't see anything that obviously indicates there's a problem with my configuration.
Have IPv6 tunnel, AICCU, but not working
Without TUN/TAP (in the case of an AYIYA tunnel) it won't do much as it won't be able to do anything.
See the Wiki for the details, and otherwise post the output.
Have IPv6 tunnel, AICCU, but not working
Shadow Hawkins on Monday, 02 November 2009 21:58:16
No further luck with Tun/TAP, but I read elsewhere in the forums that it isn't needed with a static tunnel, which is what I have. Here is my AICCU console output:
sock_getline() : "200 SixXS TIC Service on noc.sixxs.net ready (http://www.sixxs
.net)"
sock_printf() : "client TIC/draft-00 AICCU/2008.03.15-console-win32 WinNT/6.0.6
002-SP2"
sock_getline() : "200 Client Identity accepted"
sock_printf() : "get unixtime"
sock_getline() : "200 1257195388"
sock_printf() : "username MRB5-SIXXS"
sock_getline() : "200 Choose your authentication challenge please"
sock_printf() : "challenge md5"
sock_getline() : "200 18be6eaef054c2516980050f6f8370a5"
sock_printf() : "authenticate md5 b4cf272c65f6490eed75d8b8b6c091d8"
sock_getline() : "200 Succesfully logged in using md5 as MRB5-SIXXS (Matt Riker)
from 2001:7b8:3:4f:202:b3ff:fe46:bec"
sock_printf() : "tunnel list"
sock_getline() : "201 Listing tunnels"
sock_getline() : "T23587 2001:4830:1600:1fa::2 69.165.175.109 usqas01"
sock_getline() : "202 <tunnel_id> <ipv6_endpoint> <ipv4_endpoint> <pop_name>"
sock_printf() : "tunnel show T23587"
sock_getline() : "201 Showing tunnel information for T23587"
sock_getline() : "TunnelId: T23587"
sock_getline() : "Type: 6in4-static"
sock_getline() : "IPv6 Endpoint: 2001:4830:1600:1fa::2"
sock_getline() : "IPv6 POP: 2001:4830:1600:1fa::1"
sock_getline() : "IPv6 PrefixLength: 64"
sock_getline() : "Tunnel MTU: 1280"
sock_getline() : "Tunnel Name: My First Tunnel"
sock_getline() : "POP Id: usqas01"
sock_getline() : "IPv4 Endpoint: 69.165.175.109"
sock_getline() : "IPv4 POP: 66.117.47.228"
sock_getline() : "UserState: enabled"
sock_getline() : "AdminState: enabled"
sock_getline() : "202 Done"
Succesfully retrieved tunnel information for T23587
sock_printf() : "QUIT Down where we belong"
Tunnel Information for T23587:
PoP Id : usqas01
IPv6 Local : 2001:4830:1600:1fa::2/64
IPv6 Remote : 2001:4830:1600:1fa::1/64
Tunnel Type : 6in4-static
Adminstate : enabled
Userstate : enabled
Name : My First Tunnel
Flag: HAS_IFHEAD not present
Flag: NEED_IFHEAD not present
Have IPv6 tunnel, AICCU, but not working
Shadow Hawkins on Monday, 02 November 2009 22:03:44
Also, I ran AICCU test, and the 5th test failed, but I don't know what to check with my interface and routing tables. Here's the output:
###### [5/8] Ping the IPv6 Local/Your Inner Tunnel Endpoint (2001:4830:1600:1fa:
:2)
### This confirms that your tunnel is configured
### If it doesn't reply then check your interface and routing tables
Pinging 2001:4830:1600:1fa::2 with 32 bytes of data:
PING: transmit failed. General failure.
PING: transmit failed. General failure.
PING: transmit failed. General failure.
Ping statistics for 2001:4830:1600:1fa::2:
Packets: Sent = 3, Received = 0, Lost = 3 (100% loss),
Have IPv6 tunnel, AICCU, but not working
The other steps are quite useful too.
PING: transmit failed. General failure.
Never seen that, but two things to check:
- are you running these command properly as 'elevated administrator'
- what firewall software do you have?
Have IPv6 tunnel, AICCU, but not working
sock_getline() : "Type: 6in4-static"
That is a static tunnel, thus no TUN/TAP is needed.
But it won't work behind a NAT box.
Have IPv6 tunnel, AICCU, but not working
Shadow Hawkins on Monday, 02 November 2009 14:54:17
I'm not sure you have Teredo (but you can disable it just to make sure) netsh interface teredo set state disabled
But, you don't have an address on your LAN interface. Like Jeroen said, check out the console version...that's what worked in Vista.
|
![[ch]](/s/countries/ch.gif)
on Monday, 02 November 2009 14:46:15
Posting is only allowed when you are