|
Trouble with Aiccu on Vista (32bit) behind Belkin Router
![[de]](/s/countries/de.gif) Shadow Hawkins on Sunday, 28 March 2010 00:34:30
Hi,
i have some problem to get my tunnel online. Here a few infos:
Os: Vista 32bit / windows firewall (192.168.2.2)
Router: Belkin F5D7230-4 v8000 firewall deactivated (192.168.2.1)
aiccu autotest
C:\Users\Andre>aiccu autotest
sock_getline() : "200 SixXS TIC Service on noc.sixxs.net ready (http://www.sixxs
.net)"
sock_printf() : "client TIC/draft-00 AICCU/2008.03.15-console-win32 WinNT/6.0.6
001-SP1"
sock_getline() : "200 Client Identity accepted"
sock_printf() : "get unixtime"
sock_getline() : "200 1269732117"
sock_printf() : "username xxxx-SIXXS"
sock_getline() : "200 Choose your authentication challenge please"
sock_printf() : "challenge md5"
sock_getline() : "200 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"
sock_printf() : "authenticate md5 xxxxxxxxxxxxxxxxxxxxxxxxx"
sock_getline() : "200 Succesfully logged in using md5 as xxxx-SIXXS (Andre Bezek
) from 2001:7b8:3:4f:202:b3ff:fe46:bec"
sock_printf() : "tunnel show T12345"
sock_getline() : "201 Showing tunnel information for T12345"
sock_getline() : "TunnelId: T12345"
sock_getline() : "Type: 6in4-heartbeat"
sock_getline() : "IPv6 Endpoint: 2001:6f8:1c00:1c1::2"
sock_getline() : "IPv6 POP: 2001:6f8:1c00:1c1::1"
sock_getline() : "IPv6 PrefixLength: 64"
sock_getline() : "Tunnel MTU: 1280"
sock_getline() : "Tunnel Name: Tunnel"
sock_getline() : "POP Id: deham02"
sock_getline() : "IPv4 Endpoint: heartbeat"
sock_getline() : "IPv4 POP: 212.224.0.189"
sock_getline() : "UserState: enabled"
sock_getline() : "AdminState: enabled"
sock_getline() : "Password: xxxxxxxxxxxxxxxxxxxxxxxxxxxx"
sock_getline() : "Heartbeat_Interval: 60"
sock_getline() : "202 Done"
Succesfully retrieved tunnel information for T12345
sock_printf() : "QUIT Holding On"
Tunnel Information for T12345:
PoP Id : deham02
IPv6 Local : 2001:6f8:1c00:1c1::2/64
IPv6 Remote : 2001:6f8:1c00:1c1::1/64
Tunnel Type : 6in4-heartbeat
Adminstate : enabled
Userstate : enabled
Name : Tunnel
Flag: HAS_IFHEAD not present
Flag: NEED_IFHEAD not present
heartbeat_socket() - IPv4 : 192.168.2.2
[HB] HEARTBEAT TUNNEL 2001:6f8:1c00:1c1::2 sender 1269732124 191862b2a164a2c713c
a7c038bb207fb
[error] Tunnel Setup Failed
C:\Users\Andre>nslookup -type=AAAA www.ipv6.sixxs.net
Server: dnsp02.hansenet.de
Address: 213.191.92.84
Nicht-autorisierende Antwort:
Name: ipv6.nginx.sixxs.net
Addresses: 2001:7b8:3:4f:202:b3ff:fe46:bec
2001:1af8:1:f006::6
2001:838:2:1::30:67
2001:960:800::2
Aliases: www.ipv6.sixxs.net
What am I doing wrong?
Trouble with Aiccu on Vista (32bit) behind Belkin Router
Shadow Hawkins on Sunday, 28 March 2010 03:03:05
I changed my tunnel-typ to ayiya (bye bye KIS), now the IPv6 endpoint does not reply do pings
###### [6/8] Ping the IPv6 Remote/PoP Inner Tunnel Endpoint (2001:6f8:1c00:1c1::
1)
### This confirms the reachability of the other side of the tunnel
### If it doesn't reply then check your interface and routing tables
### Don't forget to check your firewall (both IPv4 and IPv6) of course
### If the previous test was succesful then this could be both
### a firewalling and a routing/interface problem
Ping wird ausgefhrt fr 2001:6f8:1c00:1c1::1 von 2001:6f8:1c00:1c1::2 mit 32 By
tes Daten:
Zeitberschreitung der Anforderung. (timeout)
Zeitberschreitung der Anforderung. (timeout)
Zeitberschreitung der Anforderung. (timeout)
Ping-Statistik fr 2001:6f8:1c00:1c1::1:
Pakete: Gesendet = 3, Empfangen = 0, Verloren = 3 (100% Verlust),
3 packets transmitted, 0 received, 100% packet loss
######
Did this work? [Y/n] n
"netsh int ipv6 reset" dont solve the problem
Trouble with Aiccu on Vista (32bit) behind Belkin Router
![[us]](/s/countries/us.gif) Shadow Hawkins on Monday, 29 March 2010 13:45:16
Did you install the TAP driver?
AYIYA needs it.
Bob
|
Posting is only allowed when you are