|
Fritz box 7270 / Sixxs Heartbeat tunnel not working
![[nl]](/s/countries/nl.gif) Carmen Sandiego on Monday, 05 April 2010 19:36:19
I have a Fritz box 7270 with the experimental firmware Laboratory version 54.04.94-15316.
I have requested a tunnel and prefix from sixxs. Both allowed.
Test 1:
IPv6 sites are not accessible at all.
http://www.ipv6forum.org/test_ipv6.php > You are connected with IPv4! The IPv6 Globe is not spinning for you.
Test 2:
C:\>ping -6 ipv6.google.com
Pinging ipv6.l.google.com [2a00:1450:8001::68] with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Ping statistics for 2a00:1450:8001::68:
Packets: Sent = 4, Received = 0, Lost = 4 (100% loss)
Why is it not working ???
Background information:
IPv6 is enabled on my Windows 7 pc.
-----------------------------------------------------------------------------
IP configuration client:
IPv6 Address. . . . . . . . . . . : 2001:1af8:fe92:0:5009:50cf:fa22:630a
Temporary IPv6 Address. . . . . . : 2001:1af8:fe92:0:849a:f4b:c7e:d141
Link-local IPv6 Address . . . . . : fe80::5009:50cf:fa22:630a%15
IPv4 Address. . . . . . . . . . . : 192.168.1.21(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : maandag 5 april 2010 19:22:30
Lease Expires . . . . . . . . . . : dinsdag 13 april 2010 19:22:31
Default Gateway . . . . . . . . . : fe80::224:feff:fecc:ef83%15
192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.5
DHCPv6 IAID . . . . . . . . . . . : 352325935
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-12-0D-00-D4-00-11-2F-FC-71-E5
DNS Servers . . . . . . . . . . . : fd00::224:feff:fecc:ef83
192.168.1.5
192.168.1.6
192.168.1.1
NetBIOS over Tcpip. . . . . . . . : Disabled
-------------------------------------------------------------------------------
IP configuration Fritz.box:
IPv6 Internet connection status: connected
Global IPv6 address: 2001:1af8:fe00:e6::2/64
Global address lifetimes (valid/preferred): 4294967295/4294967295 s
IPv6 MTU: 1280
Global IPv6 prefix for LAN: 2001:1af8:fe92::/48
Global prefix for LAN lifetimes (valid/preferred): 4294967295/4294967295 s
Primary IPv6 DNS server:
Secondary IPv6 DNS server:
-------------------------------------------------------------------------------
Sixxs info:
PoP IPv4 94.75.219.73
TIC Server tic.sixxs.net (default in AICCU)
Your Location Hoogeveen, Netherlands, The
Your IPv4 Heartbeat, currently unknown (not running on noc.sixxs.net)
IPv6 Prefix 2001:1af8:fe00:e6::1/64
PoP IPv6 2001:1af8:fe00:e6::1
Your IPv6 2001:1af8:fe00:e6::2
Created 2009-03-30 21:51:04 CEST
State Heartbeat (automatically enabled on the fly)
Fritz box 7270 / Sixxs Heartbeat tunnel not working
The PoP saw the last heartbeat packet at 2010-03-23 14:46:31, but that was from when you had that tunnel configured in AYIYA mode. Since you changed the tunnel type though no valid packet has been seen...
It seems at the moment you have a client at 87.208.99.133 which is sending heartbeat packets containing 10.0.0.2 as an IP address. That is wrong and the PoP won't accept it.
What is the full setup of your fritzbox, is there something else that is between that device and the Internet?
Fritz box 7270 / Sixxs Heartbeat tunnel not working
Carmen Sandiego on Tuesday, 06 April 2010 22:53:15
Hello Jeroen,
87.208.99.133 is my public IP-address.
Router 1:
Router local IP = 10.0.0.1
Client (Fritz-box) = 10.0.0.2
There are no other clients on this network.
10.0.0.2 is in DMZ (configured on router 1).
Router 2 (Fritz box)
Router local IP = 192.168.1.1
The fritz box is also the SixXs client.
Fritz box 7270 / Sixxs Heartbeat tunnel not working
With "Router" you mean "NAT box".
as your Fritz!Box is sitting behind a NAT, it thinks that it's public IP address is 10.0.0.2 and trying to build a tunnel that way, that won't work.
Either you'll have to remove that first NAT box and connect the Fritz!Box directly to the Internet or you'll have to convince AVM to use the 'sender' parameter in their heartbeats instead of the the IP address of the interface.
Fritz box 7270 / Sixxs Heartbeat tunnel not working
Carmen Sandiego on Friday, 09 April 2010 01:23:06
Thanks voor your answer. My hardware configuration have limitations which can't be solved at the moment.
I have transform the tunnel back to Avaiya.
|
![[ch]](/s/countries/ch.gif)
on Tuesday, 06 April 2010 12:50:33
Posting is only allowed when you are