|
Downtime (winxp, static ip, trough nat)
![[si]](/s/countries/si.gif) Shadow Hawkins on Tuesday, 04 January 2005 13:14:18
Hello,
im new to IPv6, i have followed the instructions and I beleive i got the tunnel working, but still in my stats it says 100% loss.
can someone please ping my address 2001:15c0:65ff:19::2 and see if it's accessible? when i ping it, it says <1ms, but thats probably because my computer sees itself, but others may not.
and any further instructions or hits of how to get this up and running would be very, very appreciated.
thank you,
Matej Papler
Downtime (winxp, static ip, trough nat)
![[nl]](/s/countries/nl.gif) Shadow Hawkins on Tuesday, 04 January 2005 20:27:22
Pingen naar 2001:15c0:65ff:19::2 van [MyIPv6] met 32 bytes aan gegeven
s:
Antwoord van 2001:15c0:65ff:19::2: tijd=78 ms
Antwoord van 2001:15c0:65ff:19::2: tijd=120 ms
Antwoord van 2001:15c0:65ff:19::2: tijd=146 ms
Antwoord van 2001:15c0:65ff:19::2: tijd=82 ms
Ping-statistieken voor 2001:15c0:65ff:19::2:
Pakketten: verzonden = 4, ontvangen = 4, verloren = 0
(0% verlies).
De gemiddelde tijd voor het uitvoeren van één bewerking in milliseconden:
Minimum = 78ms, Maximum = 146ms, Gemiddelde = 106ms
Seems to work fine
Downtime (winxp, static ip, trough nat)
Shadow Hawkins on Tuesday, 04 January 2005 20:30:58
didnt knew anyone cared :)
thank you for the reply
Downtime (winxp, static ip, trough nat)
Shadow Hawkins on Tuesday, 04 January 2005 20:32:53
the second question, i forgot to menchion. For ICMP replies, i heard i need some PROTO41, does it mean that i need to open any ports on my router? or is it like a standard ping request?
Downtime (winxp, static ip, trough nat)
![[de]](/s/countries/de.gif) Shadow Hawkins on Thursday, 06 January 2005 00:56:40
now there would be a lesson on ip protocols here.
there are different ip protocols. an ipv6 tunnel works as a GRE tunnel, which is protocol number 41.
udp and tcp are 6 and 8 if i'm right.
so if your router supports tcp and udp ports and nothing else, you may have a chance with DMZ'ting the machine the tunnel should end on.
if whatever i posted is not right please correct me fast. i'm tired and too lazy to look up information i remember only remotely :)
Downtime (winxp, static ip, trough nat)
Not correct ;)
From /etc/protocols on your favourite unix-alike box:
8<-----------
tcp 6 TCP # transmission control protocol
udp 17 UDP # user datagram protocol
ipv6 41 IPv6 # IPv6
gre 47 GRE # Generic Routing Encapsulation
----------->8
(encapsulated) IPv6 and GRE quite different beasts ;)
Downtime (winxp, static ip, trough nat)
Shadow Hawkins on Friday, 07 January 2005 12:51:16
Moste hardware routers don't support mapping Protocols (to bad)
here I have got a Software Router which is capable of mapping everything
but at my girlfriends place I am not able to get any IPv6 in or out.
the router just isn't able to do any other protocols then TCP and UDP.
|
![[ch]](/s/countries/ch.gif)
on Thursday, 06 January 2005 09:28:43
Posting is only allowed when you are