SixXS::Sunset 2017-06-06

Heartbeat tunnel setup Mac OS X (Panther)
[be] Shadow Hawkins on Wednesday, 13 July 2005 14:57:42
Hello, Going through the aiccu test (#aiccu test aiccu.conf), it fails at step 6: ###### [6/8] Ping the IPv6 Remote/POP Inner Tunnel Endpoint ### This confirms the reachability of the other side of the tunnel ### If it doesn't reply then check your interface and routing tables ### Don't forget to check your firewall of course ### If the previous test was succesful then this could be both ### a firewalling and a routing/interface problem PING6(56=40+8+8 bytes) ping6: sendmsg: Host is down ping6: wrote gw-89.bru-01.be.sixxs.net 16 chars, ret=-1 ping6: sendmsg: Host is down ping6: wrote gw-89.bru-01.be.sixxs.net 16 chars, ret=-1 ping6: sendmsg: Host is down ping6: wrote gw-89.bru-01.be.sixxs.net 16 chars, ret=-1 --- gw-89.bru-01.be.sixxs.net ping6 statistics --- 3 packets transmitted, 0 packets received, 100% packet loss BTW, my firewall was turned off during aiccu setup/tests. Does anyone know what could be the problem? Any help would be appreciated. Thank you in advance. Regards, Tim
Heartbeat tunnel setup Mac OS X (Panther)
[be] Shadow Hawkins on Monday, 08 August 2005 18:25:00
Hello, Same problem here... There is a bug that don't set the default route on MacOS X. Try 'route add -inet6 default -interface gif0' as root and see if it works Bigon

Please note Posting is only allowed when you are logged in.

Static Sunset Edition of SixXS
©2001-2017 SixXS - IPv6 Deployment & Tunnel Broker