Tunnelsetup with frritzbox7270 fails
Shadow Hawkins on Monday, 18 October 2010 14:52:20
I have a SixXS-IPV6 tunnel, I applied for it already 2008 but didnt use it for a long time, lately I set it to Heartbeat 6-4 and tryed it with my AVM-Fritzbox7270 with latest firmware with IPV6 capability especially supporting SixXS tunnels. First I got the errormessage: "no subnet found", then I left it run with the sixxs-client under Ubuntu for 6 weeks to earn 15 points to apply for a subnet, after I got it the fritzbox router brought first nomore errormessage, but also no IPV6-connection, I dont use the internal DSL-modem of the but use it alfter an older FB7170 with internet over LAN1 set in FB7270.
After repeated trys I get the following errormessages:
15.10.10 06:11:02 Internetverbindung IPv6 (DHCPv6) ist fehlgeschlagen: Keine Antwort vom DHCP-Server (SOL) (in System)
15.10.10 06:10:40 Internetverbindung IPv6 Fehler: Prfixzuweisung mit Fehlergrund 0
15.10.10 06:10:40 Internetverbindung wurde getrennt.
13.10.10 21:36:30 Internetverbindung wurde erfolgreich hergestellt. IP-Adresse: 192.168.0.32, DNS-Server: 192.168.0.254 und 192.168.0.254, Gateway: 192.168.0.254
13.10.10 21:36:28 Internetverbindung IPv6 Fehler: Prfixzuweisung mit Fehlergrund 0
13.10.10 21:36:28 Internetverbindung wurde getrennt.
13.10.10 20:48:49 Internetverbindung wurde erfolgreich hergestellt. IP-Adresse: 192.168.0.32, DNS-Server: 192.168.0.254 und 192.168.0.254, Gateway: 192.168.0.254
13.10.10 20:48:17 Internetverbindung wurde getrennt
My tunneldata shows the following now:
Tunnel NameMy First Tunnel
PoP Namededus01
PoP LocationDuesseldorf, Germany Germany
PoP IPv491.184.xx.xx
TIC Servertic.sixxs.net (default in AICCU)
Your LocationStuttgart, Germany Germany
Your IPv4Heartbeat, currently momentarily unavailable
IPv6 Prefixxxxx:xxx:300:30::1/64
PoP IPv6xxxx:xxx:300:30::1
Your IPv6xxxx:xxx:200:30::2
Created2008-03-15 14:42:23 CEST
StateHeartbeat (automatically enabled on the fly)
whats wrong there?
Tunnelsetup with frritzbox7270 fails
Jeroen Massar on Monday, 18 October 2010 18:14:47 I dont use the internal DSL-modem of the but use it alfter an older FB7170 with internet over LAN1 set in FB7270. [..]
13.10.10 21:36:30 Internetverbindung wurde erfolgreich hergestellt. IP-Adresse: 192.168.0.32, DNS-Server: 192.168.0.254 und 192.168.0.254, Gateway: 192.168.0.254
Which puts you behind that NAT layer. The Fritz!Box implementation only supports heartbeat and thus does not work behind a NAT.
Best idea is to move that FB7270 directly onto the internet and put the FB7170 in a corner.
Tunnelsetup with frritzbox7270 fails
Shadow Hawkins on Monday, 18 October 2010 18:40:00
FB7170 with freetz is my local DNS and many other things, setting all that up with the FB7270 would take me long time, I might try better to put FB7270 as DSL directly in the net an put 7170 behind it, since I need both as WLAN-accesspoint at different positions of the house, I hope the cables I have are sufficient to set up such a network.
Isnt there another solution for heartbeat, with protforwarding in the 7170 f.e.?
7170 is rather variable there sit it already has Freetz, FB7270 doesnt and I have no time to do that because of house and family.
Tunnelsetup with frritzbox7270 fails
Jeroen Massar on Monday, 18 October 2010 20:59:37
You can also get AICCU on freetz, then you just run it there, at least I have heard people doing that. I would try doing that if I where you.
As for protocol forwarding on the 7170/freetz, might work, but I have no idea if the 7270 will understand what to do with any of it.
Tunnelsetup with frritzbox7270 fails
Shadow Hawkins on Tuesday, 19 October 2010 12:46:38
Thanks for the tip and your suggestions.
I managed to cascade the 2 Fritzboxes the other way around, the FB7270 controls the DSL now and IPV6-tunnel connects fine that way, Telefony of FB7270 and FB7170 are also both ok, only some of my forwardings behind the FB7170 not yet work as usual, but I think I can manage this and find solutions for that.
Only question would be how to get the IPV6 in the rest of the LAN behind the FB7170, does anyone know a simple gateway to bypass the IPV4-NAT only for IPV6 (without NAT) wich would run under Freetz on a FB7170?
Tunnelsetup with frritzbox7270 fails
Shadow Hawkins on Tuesday, 19 October 2010 13:24:58
Are you going
DSL->FB7270->FB7170->LAN
How about
DSL -> FB7270->|
+-->LAN
FB7170->|
(I hope "code" means fixed font)
And disable DHCP in FB7170, giving it a fixed LAN-ip.
Generally, run the '71 in bridge, instead of router-mode.
Tunnelsetup with frritzbox7270 fails
Shadow Hawkins on Tuesday, 19 October 2010 16:06:22
I need DHCP in FB7170, because I use DNS-Masq together with DHCP and many internal URLs.
Tunnelsetup with frritzbox7270 fails
Shadow Hawkins on Tuesday, 19 October 2010 18:25:59
No problem, just as long as it gives the correct default gateway.
Tunnelsetup with frritzbox7270 fails
Shadow Hawkins on Wednesday, 20 October 2010 11:55:21
The problem would be that the internal urls were only available at one Fritzbox and you never knew which DHCP-server would grant a IP-Adress first, so DHCP and internal URLs without fixed IPadresses in the clients (sure fixed in DNSmasq) wouldnt be reliable.
Tunnelsetup with frritzbox7270 fails
Shadow Hawkins on Wednesday, 20 October 2010 14:35:58
Oh, I assumed you knew there should only be one DHCP-server per network ;-)
Disable DHCP in 7270, enable in 7170.
Put dns in whatever is convenient.
Posting is only allowed when you are logged in. |