|
opensbd ayiya problem
![[it]](/s/countries/it.gif) Carmen Sandiego on Thursday, 29 June 2006 14:22:41
Hi there,
i've setup aiccu for openbsd but i've got problem of connection.
# /usr/local/sbin/sixxs-aiccu start
Tunnel Information for T9296:
POP Id : ittrn01
IPv6 Local : 2001:1418:100:16b::2/64
IPv6 Remote : 2001:1418:100:16b::1/64
Tunnel Type : ayiya
Adminstate : enabled
Userstate : enabled
#
# ping6 -c1 ::1 |grep time
16 bytes from ::1, icmp_seq=0 hlim=64 time=0.621 ms
#
# ping6 -c1 2001:1418:100:16b::2 |grep time
16 bytes from 2001:1418:100:16b::2, icmp_seq=0 hlim=64 time=0.597 ms
#
# ping6 -c1 2001:1418:100:16b::1
PING6(56=40+8+8 bytes) 2001:1418:100:16b::2 --> 2001:1418:100:16b::1
ping6: sendmsg: Network is down
ping6: wrote 2001:1418:100:16b::1 16 chars, ret=-1
...
# netstat -f inet6 -rn
Routing tables
Internet6:
Destination Gateway Flags Refs Use Mtu Interface
default 2001:1418:100:16b::1 UGS 0 0 - gif0
::1 ::1 UH 0 48 33224 lo0
2001:1418:100:16b::1 2001:1418:100:16b::2 UH 1 0 - gif0
2001:1418:100:16b::2 link#12 UHL 0 0 - lo0
fe80::%rl0/64 link#1 UC 0 0 - rl0
fe80::%rl1/64 link#2 UC 0 0 - rl1
fe80::%lo0/64 fe80::1%lo0 U 0 0 - lo0
fe80::%gif0/64 link#12 UC 0 0 - gif0
fe80::20a:cdff:fe0f:20e6%gif0 link#12 UHL 0 0 - lo0
fe80::1418:100:16b:2%gif0 link#12 UHL 0 0 - lo0
ff01::/32 ::1 UC 0 0 - lo0
ff02::%rl0/32 link#1 UC 0 0 - rl0
ff02::%rl1/32 link#2 UC 0 0 - rl1
ff02::%lo0/32 ::1 UC 0 0 - lo0
ff02::%gif0/32 link#12 UC 0 0 - gif0
#
Does someone have the same problems or have any suggestions?
Best regards, Riccardo Giuntoli
opensbd ayiya problem
![[de]](/s/countries/de.gif) Shadow Hawkins on Sunday, 23 July 2006 11:45:25
Hi,
I am having the same problem with eihter aiccu or an older sixxs-heartbeatd (from /usr/ports/net/sixxs-heartbeatd).
I opened the heartbeat port in pf to check if this would help, but didnt.
This is what aiccu test brings up..
###### [6/8] Ping the IPv6 Remote/POP Inner Tunnel Endpoint (2001:6f8:900:70b::1)
### This confirms the reachability of the other side of the tunnel
### If it doesn't reply then check your interface and routing tables
### Don't forget to check your firewall of course
### If the previous test was succesful then this could be both
### a firewalling and a routing/interface problem
PING6(56=40+8+8 bytes) 2001:6f8:900:70b::2 --> 2001:6f8:900:70b::1
--- 2001:6f8:900:70b::1 ping6 statistics ---
3 packets transmitted, 0 packets received, 100.0% packet loss
######
Did this work? [Y/n] n
works fine till this point, anyone knows help?
Thanks in advance, Tim
opensbd ayiya problem
Shadow Hawkins on Sunday, 23 July 2006 16:10:17
got it working now.. i wanted to use a 6to4-heartbeat, not static, well and it works now :) too bad i have -5 credits now, but i can handle one week uptime i guess })
opensbd ayiya problem
![[ch]](/s/countries/ch.gif) Carmen Sandiego on Tuesday, 25 July 2006 14:02:09
Try with the new version:
# aiccu version
AICCU 2006.07.25-console-openbsd by Jeroen Massar
It works on OpenBSD 3.8
Ciao
Chris
|
Posting is only allowed when you are