If Aiccu starts as a daemon it wont give any output below at the end in the logs, so I disabled daemonizing, if I manualy start it again I get the error below. Anyone who has an idea why this occurs? guitar# /usr/local/etc/rc.d/sixxs-aiccu.sh start sock_getline() : "200 SixXS TIC Service on noc.sixxs.net ready (http://www.sixxs.net)" sock_printf() : "client TIC/draft-00 AICCU/2005.01.31-console-kame FreeBSD/5.4-RELEASE-p16" sock_getline() : "200 Client Identity accepted" sock_printf() : "get unixtime" sock_getline() : "200 1155513183" sock_printf() : "username MVW43-RIPE" sock_getline() : "200 Choose your authentication challenge please" sock_printf() : "challenge md5" sock_getline() : "200 :md5:" sock_printf() : "authenticate md5 :md5:" sock_getline() : "200 Succesfully logged in using md5 as MVW43-RIPE (Marius van Witzenburg) from 62.212.92.70" sock_printf() : "tunnel show T9523" sock_getline() : "201 Showing tunnel information for T9523" sock_getline() : "TunnelId: T9523" sock_getline() : "Type: 6in4-static" sock_getline() : "IPv6 Endpoint: 2001:960:2:530::2" sock_getline() : "IPv6 POP: 2001:960:2:530::1" sock_getline() : "IPv6 PrefixLength: 64" sock_getline() : "Tunnel MTU: 1280" sock_getline() : "POP Id: nlams04" sock_getline() : "IPv4 Endpoint: 62.212.92.70" sock_getline() : "IPv4 POP: 213.204.193.2" sock_getline() : "UserState: enabled" sock_getline() : "AdminState: enabled" sock_getline() : "202 Done" Succesfully retrieved tunnel information for T9523 sock_printf() : "QUIT It Could Be Sweet" Tunnel Information for T9523: POP Id : nlams04 IPv6 Local : 2001:960:2:530::2/64 IPv6 Remote : 2001:960:2:530::1/64 Tunnel Type : 6in4-static Adminstate : enabled Userstate : enabled ifconfig: SIOCIFCREATE: File exists route: writing to routing socket: File exists add host 2001:960:2:530::1: gateway 2001:960:2:530::2: File exists route: writing to routing socket: File exists add net default: gateway 2001:960:2:530::1: File exists