|
DD-WRT v23 SP3 mini and "AICCU"
![[de]](/s/countries/de.gif) Shadow Hawkins on Thursday, 05 July 2007 23:18:14
hello experts,
finally :Z , i found a version of DD-WRT whitch allow me to use "aiccu" and "radvd" on my router !!!
when i start aiccu :
~ # aiccu test
Could not open config file "/etc/aiccu.conf"
because the configuration file seems to be here:
~ # vi /jffs/etc/aiccu.conf
what can i do ? :?
regards
marc
DD-WRT v23 SP3 mini and "AICCU"
Shadow Hawkins on Friday, 06 July 2007 18:37:51
This seems to be a non sixxs problem, because every other software use his configuration in /etc. This question is releated to the dd-wrt stuff and not special to sixxs.
After looking into the dd-wrt wiki i catch this:
http://www.dd-wrt.com/wiki/index.php/IPv6#Install_AICCU
Have you tried this already?
HTH
Frank
DD-WRT v23 SP3 mini and "AICCU"
Shadow Hawkins on Tuesday, 17 July 2007 16:02:18
Thanks for your reply Frank,
i just figured out that the " mini" version does not support ipv6 , so "std" is required
but i have not enough RAM on my linksys , just 16 MB i try to find a ASUS with 32 MB
an try again.
cheers
Marc
DD-WRT v23 SP3 mini and "AICCU"
Shadow Hawkins on Tuesday, 17 July 2007 18:22:33
Do you have linux and commandline expirience? If so, give freewrt[1] a try. I don't check the possibility to get it working with 16MB ram, but freewrt hasn't webgui, so this needs not so much ram.
If you use the webbuilder of freewrt and this isn't at least build 3054[2], than comppile by yourself or send me a note, i compile one for wrt54gs 1.0 and 1.1.
[1] http://www.freewrt.org
[2] http://www.sixxs.net/forum/?msg=setup-539845-539856-540679-540686-540692-540714-541080-542831
MfG
Frank.
DD-WRT v23 SP3 mini and "AICCU"
![[us]](/s/countries/us.gif) Shadow Hawkins on Sunday, 24 August 2008 23:11:47
I am not sure how dead this thread is but here goes...
I am running DD-WRT v23 and am trying to setup my first AYIYA tunnle using AICCU also did you follow the instructions here on the DD-WRT wiki as i can not get the first step ( # ipkg install http://downloads.openwrt.org/kamikaze/packages/mipsel/aiccu_20070115-1_mipsel.ipk to run i get "ERROR: Failed to retrieve http://downloads.openwrt.org/ka..." just wondering how you got it to work.
I am using the latest version of putty and am loged in as root (I believe the only user on the box)
|
Posting is only allowed when you are