TAP32-Win32 Adapter not configured properly
Shadow Hawkins on Friday, 13 July 2007 23:15:37
Hi all,
I am very new at IPv6 and everything around it so I don't know much about it (yet). I am having trouble getting IPv6 working on my WinXP Pro SP2 working.
I did all the steps in the '10 Easy Steps to IPv6'-tutorial correctly afaik.
Now I tried the GUI version of AICCU and seems to work well. But I cannot connect
to IPv6 addresses. I then tried the console version which could give me this:
C:\Documents and Settings\-Daan-\Bureaublad>aiccu-console.exe start
Succesfully retrieved tunnel information for T11993
Error opening registry key: SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E32
5-11CE-BFC1-08002BE10318}\0000\ComponentId (t2)
Error opening registry key: SYSTEM\CurrentControlSet\Control\Network\{4D36E972-E
325-11CE-BFC1-08002BE10318}\SYSTEM\CurrentControlSet\Control\Network\{4D36E972-E
325-11CE-BFC1-08002BE10318}\{4ED5CADC-0661-4A12-B71F-C6F06D128E54}\Connection\Na
me (p3)
Error opening registry key: SYSTEM\CurrentControlSet\Control\Network\{4D36E972-E
325-11CE-BFC1-08002BE10318}\SYSTEM\CurrentControlSet\Control\Network\{4D36E972-E
325-11CE-BFC1-08002BE10318}\{63E02842-C105-4FB1-B2A9-F8A5E3AEE128}\Connection\Na
me (p3)
[NULL] {CD0BE6A4-D846-442F-B527-2DD57EAAF45B}
*** Adapter with GUID {CD0BE6A4-D846-442F-B527-2DD57EAAF45B} doesn't have a link
from the control panel
Found = 0, Count = 0
[tun-start] TAP-Win32 Adapter not configured properly...
I installed the TAP32 drivers from the download page and tried this too:
C:\Documents and Settings\-Daan-\Bureaublad>aiccu-console.exe listtaps
Error opening registry key: SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E32
5-11CE-BFC1-08002BE10318}\0000\ComponentId (t2)
Error opening registry key: SYSTEM\CurrentControlSet\Control\Network\{4D36E972-E
325-11CE-BFC1-08002BE10318}\SYSTEM\CurrentControlSet\Control\Network\{4D36E972-E
325-11CE-BFC1-08002BE10318}\{4ED5CADC-0661-4A12-B71F-C6F06D128E54}\Connection\Na
me (p3)
Error opening registry key: SYSTEM\CurrentControlSet\Control\Network\{4D36E972-E
325-11CE-BFC1-08002BE10318}\SYSTEM\CurrentControlSet\Control\Network\{4D36E972-E
325-11CE-BFC1-08002BE10318}\{63E02842-C105-4FB1-B2A9-F8A5E3AEE128}\Connection\Na
me (p3)
Available TAP-WIN32 adapters [name, GUID]:
[NULL] {CD0BE6A4-D846-442F-B527-2DD57EAAF45B}
*** Adapter with GUID {CD0BE6A4-D846-442F-B527-2DD57EAAF45B} doesn't have a link
from the control panel
I am behind two routers, one with NAT disabled and functions as a switch. IPv6 protocol is installed correctly. My AYIYA tunnel to bebru01 is active and I can ping it fine with IPv4. I hope I'm not forgetting to mention anything here, if so, forgive me I shall supply them ASAP.
I am running latest versions of the AICCU (as well as the GUI as the console version). And afaik I have Windows up-to-date.
I don't know if this is necessary:
C:\Documents and Settings\-Daan->netsh int ipv6 show address
Actieve status onderzoeken...
Interface 8: {CD0BE6A4-D846-442F-B527-2DD57EAAF45B}
Adrestype DAD-status Geldigheid Voorkeur Adres
--------- ---------- ------------ ------------ -----------------------------
Verbinding Voorlopig infinite infinite fe80::2ff:cdff:fe0b:e6a4
Interface 7: Teredo Tunneling Pseudo-Interface
Adrestype DAD-status Geldigheid Voorkeur Adres
--------- ---------- ------------ ------------ -----------------------------
Verbinding Voorkeur infinite infinite fe80::ffff:ffff:fffd
Interface 5: LAN-verbinding
Adrestype DAD-status Geldigheid Voorkeur Adres
--------- ---------- ------------ ------------ -----------------------------
Verbinding Voorkeur infinite infinite fe80::240:f4ff:fecd:7c14
Interface 4: {57140F38-EF30-4D89-9A02-F722549BBC61}
Adrestype DAD-status Geldigheid Voorkeur Adres
--------- ---------- ------------ ------------ -----------------------------
Verbinding Voorkeur infinite infinite fe80::7879:5ff:fe48:e336
Interface 2: Automatic Tunneling Pseudo-Interface
Adrestype DAD-status Geldigheid Voorkeur Adres
--------- ---------- ------------ ------------ -----------------------------
Verbinding Voorkeur infinite infinite fe80::5efe:192.168.1.64
Interface 1: Loopback Pseudo-Interface
Adrestype DAD-status Geldigheid Voorkeur Adres
--------- ---------- ------------ ------------ -----------------------------
Loopback Voorkeur infinite infinite ::1
Verbinding Voorkeur infinite infinite fe80::1
netsh int ipv6 show route doesn't work.
Thanks in
advance
Posting is only allowed when you are logged in. |