Static Tunnel - Latency Graph Question
Shadow Hawkins on Wednesday, 14 November 2007 20:51:09
Hi
Problem :
The Latency Graph for my tunnel is not working on sixxs tunnel info page.
Status :
I have a static tunnel connected to gblon02 pop (0% loss).
I can ping6/traceroute6 from my tunnel end to the pop tunnel end and can ping6/traceroute6 the wider IPv6 Internet from my tunnel end.
I can also get the wider IPv6 internet to ping6/traceroute6 to my tunnel end with no problem.
Question :
Have I correctly understood how the Latency Graph data is collected ?
The PoP tunnel End sends ICMPv6 Echo Requests over the tunnel and my end is suppose to respond with ICMPv6 Echo Replies over the tunnel back to the PoP tunnel End ?
Any help would be greatly appreciated
Static Tunnel - Latency Graph Question
Jeroen Massar on Wednesday, 14 November 2007 20:52:01
You understood it correctly, but it seems that the harddisk in gblon02 doesn't like it though, it went quite dead, as such the pings don't work. Goscomb notified and they will be replacing the disk.
Static Tunnel - Latency Graph Question
Shadow Hawkins on Wednesday, 14 November 2007 21:16:08
Hi
Thanks for the info.
I can still ping6 their Pop End and the rest of the IPv6 Internet.
Will this put back my accounts credits ? As I am trying to save up for a subnet ? :)
Thanks Again
Static Tunnel - Latency Graph Question
Jeroen Massar on Wednesday, 14 November 2007 21:19:12
The PoP still routes packets, just not new tunnels and pinging is for instance broken.
A new disk on it's way and the PoP should be fully back before midnight and thus folks should not notice it in their uptime counters.
Static Tunnel - Latency Graph Question
Shadow Hawkins on Wednesday, 14 November 2007 22:05:23
Hi
Thats good to know as I do not want my subnet delayed :)
I will leave my firewall alone till then.
Thanks Again
Posting is only allowed when you are logged in. |