Forum - Configuring DIR-615 - Unable to reach outside the network :: SixXS

Configuring DIR-615 - Unable to reach outside the network

Shadow Hawkins on Monday, 19 March 2012 16:32:14

Hello, I am trying to configure my home network with IPv6 but I am with some problems. This is my configuration according to the web interface: IPv6 Connection Type : IPv6 in IPv4 Tunnel Network Status : connect WAN IPv6 Address : 2001:1291:200:2bc::2/64 IPv6 Default Gateway : 2001:1291:200:2bc::1 LAN IPv6 Address : 2001:1291:2000:82bc::/64 LAN IPv6 Link-Local Address : fe80::224:1ff:fe36:bd82/64 Primary DNS Address : 2001:4860:4860::8888 Seccondary DNS Address : 2001:4860:4860::8844 I am using Google DNS Resolvers, as you can see. My LAN network is being auto-configured with DHCPv6 (stateful), but I have the same problem with stateless autoconfiguration. Now to my problem, I am unable to reach anything outsite the network. Tried using "ping" with www.ipv6.br and ipv6.google.com, but none worked. I seems to find the IPv6 address of them.

Pinging www.ipv6.br [2001:12ff:0:4:22] from [2001:1291:...] with 32 bytes of data: Request timed out Request timed out Request timed out...

According to windows diagnostic the DNS resolver is unable to communicate with the DND resolver. Thanks!

Configuring DIR-615 - Unable to reach outside the network

Shadow Hawkins on Monday, 19 March 2012 16:41:41

Sorry for the double post, but I just discovered that am unable to ping my tunnel remote address, 2001:1291:200:2bc::1. My local address works though (2001:1291:200:2bc::2). Any idea of what could be causing this? Thanks.

Configuring DIR-615 - Unable to reach outside the network

Jeroen Massar SixXS Staff

on Monday, 19 March 2012 17:06:17

That simply shows that your tunnel does not work in the most basic way. As such, you will need to provide a lot more details to figure out what goes wrong. Have a look at the "Reporting Problems Checklist" on the contact page, there you will find a generic good list of things to check. Especially Firewall rules come to mind.

Configuring DIR-615 - Unable to reach outside the network

Shadow Hawkins on Thursday, 22 March 2012 23:55:13

Some days ago when I was trying to fix it, fixed itself after rebooting the router... Well, now that it seems to be stable enough I feel that I must post here to say that it is working perfectly :)

Please note Posting is only allowed when you are logged in.