|
Can't ping tunnel from outside?
![[be]](/s/countries/be.gif) Shadow Hawkins on Tuesday, 22 May 2012 22:21:44
It's seems that i'm not able to ping my tunnel from the outside.
What details should i provide here to make things easyier?
Can't ping tunnel from outside?
Everything possible... ? :)
Does the tunnel even work at all? If yes, then, do you have firewall rules?
Can't ping tunnel from outside?
Shadow Hawkins on Wednesday, 23 May 2012 17:55:38
Well, it doesn't seem to work at all. Just to be sure it wasn't a firewall issue, i double checked my firewall settings, and they're fine.
I've compared my routing table with a friends table, (who also has a tunnel at sixxs, ayiya etc..), and there's something wrong.
My routing table:
Kernel IPv6 routing table
Destination Next Hop Flag Met Ref Use If
fe80::/64 :: Un 256 0 0 sixxs
fe80::/64 :: U 256 0 0 eth0
::/0 :: !n -1 1 45 lo
::1/128 :: Un 0 1 6 lo
fe80::21e:bff:feb3:f48f/128 :: Un 0 1 0 lo
ff00::/8 :: U 256 0 0 sixxs
ff00::/8 :: U 256 0 0 eth0
::/0 :: !n -1 1 45 lo
an excerpt from my friends table:(wich i'm missing apparantly)
::/0 2a02:578:3fe:6d::1 UG 1024 0 0 sixxs
I hope i've provided you with enough info.
If not, let me know what you need next, or what the next step is i should take.
Many thx!!
Kind regards,
Tom.
Can't ping tunnel from outside?
Your tunnel is not configured at all... thus then indeed it won't work.
I hope i've provided you with enough info.
You have provided only a routing table up to now, please see the contact page for a big list of things you can and should provide.
If not, let me know what you need next, or what the next step is i should take.
Reading would be a good first one ;)
Can't ping tunnel from outside?
![[us]](/s/countries/us.gif) Shadow Hawkins on Thursday, 24 May 2012 15:57:42
Yeah, you need a default gateway to do anything.
Did you configure the tunnel at all? What did you do?
Can't ping tunnel from outside?
Shadow Hawkins on Thursday, 24 May 2012 20:13:47
I thought i'd taken all the steps needed to get this tunnel up and running.
Command line (unix-alike system) usage of AICCU
For Debian based systems there is a debconf frontend available in the package.
There is no GUI version of AICCU for the various UNIX-alike OS's, as such steps 8-10 are in this case:
Install aiccu from the package you downloaded or by building it from source (using GNU make)
Configure the /etc/aiccu.conf file by filling in your details
type "aiccu start" or use eg /etc/init.d/aiccu start
Goto IPv6Calc, this should reveal that you are using IPv6. (and this is where the trouble started)
If it does not work, don't hesitate to Contact SixXS by sending a problem report.(that's what i did now)
Do read the "Reporting Problems" section carefully in that case, because we won't be able to help you out if you don't obide by the SixXS communication guidelines.(so i guess i'll have some more reading to do)
Anyway, i'll be checking my setup/config/etc once over...
Thx to all for the comments.
Can't ping tunnel from outside?
Cut & pasting text from somewhere is nice, but it is really useful if you provided the output of commands, please see the big list in the Reporting Problems section of the contact page.
It is really funny that you even include that point in your own text...
|
![[ch]](/s/countries/ch.gif)
on Wednesday, 23 May 2012 10:18:10
Posting is only allowed when you are