|
Can't connect using ipv6
![[cy]](/s/countries/cy.gif) Shadow Hawkins on Thursday, 27 September 2012 16:55:50
Hello everyone .
I' m a new member here , i'm using windows 7 x64 and the concole version of aiccu . I've been trying to make it work with no success .
This is my aiccu.conf
# AICCU Configuration
# Login information
username username-SIXXS
password mypass
# Interface names to use
# ipv6_interface is the name of the interface that will be used as a tunnel interface.
# On *BSD the ipv6_interface should be set to gifX (eg gif0) for proto-41 tunnels
# or tunX (eg tun0) for AYIYA tunnels.
ipv6_interface sixxs
# The tunnel_id to use
# (only required when there are multiple tunnels in the list)
tunnel_id T....my tunnel
# Be verbose?
verbose false
# Daemonize?
daemonize true
# Automatic Login and Tunnel activation?
automatic true
# Require TLS?
# When set to true, if TLS is not supported on the server
# the TIC transaction will fail.
# When set to false, it will try a starttls, when that is
# not supported it will continue.
# In any case if AICCU is build with TLS support it will
# try to do a 'starttls' to the TIC server to see if that
# is supported.
requiretls false
And this is the output when running the concole
Successfully retrieved tunnel information for T104690
Error opening registry key: SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E32
5-11CE-BFC1-08002BE10318}\Properties (t2)
Renaming adapter 'aiccu' to 'sixxs' and using it
The file exists.
Ok.
Ok.
Ok.
Ok.
The object already exists.
The object already exists.
The object already exists.
Ok.
[AYIYA-start] : Anything in Anything (draft-02)
[AYIYA-tun->tundev] : (Socket to TUN) started
This is the output with verbose set to true
Trying to connect to TIC server tic.sixxs.net
sock_getline() : "200 SixXS TIC Service on nlhaa01.sixxs.net ready (http://www.s
ixxs.net)"
sock_printf() : "client TIC/draft-00 AICCU/2012.02.02-win32 - WinNT/6.1.7601-SP
1"
sock_getline() : "200 Client Identity accepted"
sock_printf() : "get unixtime"
sock_getline() : "200 1348764820"
sock_printf() : "username myusername-SIXXS"
sock_getline() : "200 CCJ5-SIXXS choose your authentication challenge please"
sock_printf() : "challenge md5"
sock_getline() : "200 e9638a4cc40c3c7f3b45e9d0b9bbeb2c"
sock_printf() : "authenticate md5 60b0f3786d924c97f7fac6509ef5819e"
sock_getline() : "200 Successfully logged in using md5 as -SIXXS (
haralambous)"
sock_printf() : "tunnel show T104690"
sock_getline() : "201 Showing tunnel information for T104690"
sock_getline() : "TunnelId: T104690"
sock_getline() : "Type: ayiya"
sock_getline() : "IPv6 Endpoint: 2001:648:ff00:41::2"
sock_getline() : "IPv6 POP: 2001:648:ff00:41::1"
sock_getline() : "IPv6 PrefixLength: 64"
sock_getline() : "Tunnel MTU: 1280"
sock_getline() : "Tunnel Name: My First Tunnel"
sock_getline() : "POP Id: grath01"
sock_getline() : "IPv4 Endpoint: ayiya"
sock_getline() : "IPv4 POP: 194.177.211.246"
sock_getline() : "UserState: enabled"
sock_getline() : "AdminState: enabled"
sock_getline() : "Password: mypass"
sock_getline() : "Heartbeat_Interval: 60"
sock_getline() : "202 Done"
Successfully retrieved tunnel information for T104690
sock_printf() : "QUIT Deer Stop"
Tunnel Information for T104690:
PoP Id : grath01
IPv6 Local : 2001:648:ff00:41::2/64
IPv6 Remote : 2001:648:ff00:41::1/64
Tunnel Type : ayiya
Adminstate : enabled
Userstate : enabled
aiccu_setup(2001:648:ff00:41::2, first)
Flag: HAS_IFHEAD not present
Flag: NEED_IFHEAD not present
Error opening registry key: SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E32
5-11CE-BFC1-08002BE10318}\Properties (t2)
Renaming adapter 'aiccu' to 'sixxs' and using it
aiccu_os_exec("netsh int set interface name="aiccu" newname="sixxs"")
The file exists.
[tun-start] Trying \\.\Global\{078C08FB-B082-4395-8A17-0F512FBD129C}.tap
[tun-start] This is Local Area Connection* 9, not the one we want
[tun-start] Trying \\.\Global\{0EF47755-3032-4660-946C-40058ECF2235}.tap
[tun-start] This is aiccu, not the one we want
[tun-start] TAP-Win32 Driver Version 9.9
aiccu_setup(2001:648:ff00:41::2, other)
Flag: HAS_IFHEAD not present
Flag: NEED_IFHEAD not present
aiccu_os_exec("netsh int ipv6 6to4 set state disabled")
Ok.
aiccu_os_exec("netsh int ipv6 set teredo disable")
Ok.
aiccu_os_exec("netsh int ipv6 isatap set state state=disabled")
Ok.
aiccu_os_exec("netsh int ipv6 set subinterface "sixxs" mtu=1280")
Ok.
aiccu_os_exec("netsh int ipv6 add address "sixxs" 2001:648:ff00:41::2")
The object already exists.
aiccu_os_exec("netsh int ipv6 add route 2001:648:ff00:41::2/64 sixxs")
The object already exists.
aiccu_os_exec("netsh int ipv6 add route 0::/0 sixxs 2001:648:ff00:41::1 publish=
yes")
The object already exists.
aiccu_os_exec("netsh advfirewall firewall add rule name="AICCU: Allow incoming I
CMPv6 echo request" protocol=icmpv6:8,any dir=in action=allow")
Ok.
[AYIYA-start] : Anything in Anything (draft-02)
[AYIYA-tun->tundev] : (Socket to TUN) started
Can anyone please help me ?
Thanks a lot
Can't connect using ipv6
Error opening registry key: SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\Properties (t2) Renaming adapter 'aiccu' to 'sixxs' and using it The file exists.
You seem to have an interface named 'aiccu' and one named 'sixxs' and maybe both are half configured.
You should only have one tun/tap interface, and as you have set the interface name to 'sixxs' in the config, that is the one that should remain.
Can't connect using ipv6
Shadow Hawkins on Thursday, 27 September 2012 17:54:33
How i do that ? The interface aiccu is the one with the TAP-Win32 adapter v9 and the sixxs is my default wireless connection which i'm connecting . How do i fix it ?
Thanks for your help
Can't connect using ipv6
the sixxs is my default wireless connection which i'm connecting
Your wireless interface should not be named sixxs, call it 'wireless' or something. You can rename it from the Network control panel or by using the following:
netsh int set interface name="sixxs" newname="Wireless"
And then you might want to issue a:
netsh int ipv6 reset
just in case to make all kind of odd settings go away.
Can't connect using ipv6
Shadow Hawkins on Thursday, 27 September 2012 18:05:27
Thanks for the reply . I did that , but i keep getting that error .
I tried to comment the line with the ipv6 interface so that it would use the default one which is name aiccu
Here is the output :
Trying to connect to TIC server tic.sixxs.net
sock_getline() : "200 SixXS TIC Service on nlams04.sixxs.net ready (http://www.s
ixxs.net)"
sock_printf() : "client TIC/draft-00 AICCU/2012.02.02-win32 - WinNT/6.1.7601-SP
1"
sock_getline() : "200 Client Identity accepted"
sock_printf() : "get unixtime"
sock_getline() : "200 1348768942"
sock_printf() : "username
sock_getline() : "200 CCJ5-SIXXS choose your authentication challenge please"
sock_printf() : "challenge md5"
sock_getline() : "200 b28b8d1b84b0cf39a9a4d653e6f6f25d"
sock_printf() : "authenticate md5 10d87bec3f4f4496122551ca48cf7072"
sock_getline() : "200 Successfully logged in using md5 as CCJ5-SIXXS (Christos C
haralambous)"
sock_printf() : "tunnel show T104690"
sock_getline() : "201 Showing tunnel information for T104690"
sock_getline() : "TunnelId: T104690"
sock_getline() : "Type: ayiya"
sock_getline() : "IPv6 Endpoint: 2001:648:ff00:41::2"
sock_getline() : "IPv6 POP: 2001:648:ff00:41::1"
sock_getline() : "IPv6 PrefixLength: 64"
sock_getline() : "Tunnel MTU: 1280"
sock_getline() : "Tunnel Name: My First Tunnel"
sock_getline() : "POP Id: grath01"
sock_getline() : "IPv4 Endpoint: ayiya"
sock_getline() : "IPv4 POP: 194.177.211.246"
sock_getline() : "UserState: enabled"
sock_getline() : "AdminState: enabled"
sock_getline() : "Password: "
sock_getline() : "Heartbeat_Interval: 60"
sock_getline() : "202 Done"
Successfully retrieved tunnel information for T104690
sock_printf() : "QUIT Never Ever Land"
Tunnel Information for T104690:
PoP Id : grath01
IPv6 Local : 2001:648:ff00:41::2/64
IPv6 Remote : 2001:648:ff00:41::1/64
Tunnel Type : ayiya
Adminstate : enabled
Userstate : enabled
aiccu_setup(2001:648:ff00:41::2, first)
Flag: HAS_IFHEAD not present
Flag: NEED_IFHEAD not present
Error opening registry key: SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E32
5-11CE-BFC1-08002BE10318}\Properties (t2)
Using configured interface aiccu
[tun-start] Trying \\.\Global\{078C08FB-B082-4395-8A17-0F512FBD129C}.tap
[tun-start] This is Local Area Connection* 9, not the one we want
[tun-start] Trying \\.\Global\{0EF47755-3032-4660-946C-40058ECF2235}.tap
[tun-start] This is aiccu, the one we want
[tun-start] TAP-Win32 Driver Version 9.9
aiccu_setup(2001:648:ff00:41::2, other)
Flag: HAS_IFHEAD not present
Flag: NEED_IFHEAD not present
aiccu_os_exec("netsh int ipv6 6to4 set state disabled")
Ok.
aiccu_os_exec("netsh int ipv6 set teredo disable")
Ok.
aiccu_os_exec("netsh int ipv6 isatap set state state=disabled")
Ok.
aiccu_os_exec("netsh int ipv6 set subinterface "aiccu" mtu=1280")
Ok.
aiccu_os_exec("netsh int ipv6 add address "aiccu" 2001:648:ff00:41::2")
The object already exists.
aiccu_os_exec("netsh int ipv6 add route 2001:648:ff00:41::2/64 aiccu")
The object already exists.
aiccu_os_exec("netsh int ipv6 add route 0::/0 aiccu 2001:648:ff00:41::1 publish=
yes")
The object already exists.
aiccu_os_exec("netsh advfirewall firewall add rule name="AICCU: Allow incoming I
CMPv6 echo request" protocol=icmpv6:8,any dir=in action=allow")
Ok.
[AYIYA-start] : Anything in Anything (draft-02)
[AYIYA-tun->tundev] : (Socket to TUN) started
Can't connect using ipv6
I tried to comment the line with the ipv6 interface so that it would use the default one which is name aiccu
At least it selects the correct interface now and one can also see that it find the TUN/TAP driver, which is good.
But likely you still have other configuration statements on other interfaces left which interfere.
Did you try a:
tracert www.ipv6.sixxs.net
after this, as it might be that things just work even though errors are emitted.
Of course it is wise to at least peak at the output of:
ipconfig /all
netstat -rn
to see how things are set up now.
Can't connect using ipv6
Shadow Hawkins on Thursday, 27 September 2012 18:33:15
it finally worked thanks a lot , but now i have a new issue .
I have tried to add it as a service with windows 7 x64 , i did exactly as the wiki said , from here https://www.sixxs.net/wiki/Configuring_Windows_Vista but it won't start when i boot for some reason . I have the same names as the files at the wiki .
|
![[ch]](/s/countries/ch.gif)
on Thursday, 27 September 2012 17:20:34
Posting is only allowed when you are